SGM IDEA SPOT 250 User Manual page 15

GB
- Main menu 1
1. Press [MODE/ESC] to enter the main menu (display flashing).
2. Press [UP] or [DOWN] button to select ''LAMP''.
- Lamp on/off
With this function you can switch the lamp on or off via the Control Board.
1. Select ''OPEN'' by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows ''ON'' or ''OFF''.
3. Press [UP] to select ''ON'' if you wish to enable this function or press [DOWN] button to ''OFF'' if you
don't.
4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
- Lamp automated on with power.
With this function you can set the lamp be ignited or not when the fixture is power on.
Select ''LAAU'' by pressing [UP] or [DOWN] button.
1.
2. Press [ENTER], the display shows ''ON'' or ''OFF''.
Press [UP] to select ''ON'' if you wish to enable this function or press [DOWN] button to ''OFF'' if
3.
you don't.
Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
4.
- Lamp on/off via external controller
With this function you can switch the lamp on or off via an external controller.
1. Select ''ONLI'' by pressing [UP] or [DOWN] button.
Press [ENTER], the display shows ''ON'' or ''OFF''.
2.
Press [UP] to select ''ON'' if you wish to enable this function or press [DOWN] button to ''OFF'' if
3.
you don't.
Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
4.
- Delay lamp on
With this function you can delay the lamp ignition.
1. Select ''DELA'' by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows "D-XX","XX" stands for the version number, e.g. "D-15" (default
setting is 15 minutes for lamp delay time)
3. Press [UP] or [DOWN] to set the desired value for lamp delay time.
4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
- Main menu 2
Press [MODE/ESC] to enter the main menu (display flashing).
1.
Press [UP] or [DOWN] button. to select ''SET''.
2.
Idea Spot 250
SGM Technology for Lighting
13
WIT070 V1.0-01NR