Voyager VOM74WP Owner's Manual page 8

VOM74WP
3. SELECT
Figure 1: Source Select Sequence (All Source O
- Source input modes that are skipped through the menu
control fun on will be skipped. (Figure below shows
sequence with CAM/INPUT 3 skipped.)
Figure 2: Source Select Sequence (CH3 "Skip")
- Source ID is indicated by OSD in the top
Secondary Func
- While in Menu mode, the SELECT
the highlighted
Third F
- While in source "SCAN" mode, pressing the select bu
will stop the scan and display the current source. "Pause"
will be displayed by OSD. Press "SELECT" key again to
resume source scan.
Primary Func n Input Source Select
- Pressing the SELECT
modes as Figure 1.
n Menu O
n or op on se ng.
on Scan Pause/Start
to sequence the source input
n Selec on
is used to select
8
s "On")
corner of the screen.