Unit Description; Coverage Patterns - wattstopper CX-105 Installation Instructions Manual

UNIT DESCRIPTION

The CX-105 is a 24VDC passive infrared (PIR) occupancy sensor which controls
lighting and HVAC systems based on occupancy.
PIR sensing systems are passive systems which react to changes in infrared energy
(moving body heat) within the coverage area. PIR sensors must directly "see"
motion of an occupant to detect them, so careful consideration must be given to
sensor placement.

COVERAGE PATTERNS

Coverages shown are maximum and represent coverage for walking motion. Actual
coverage will vary slightly depending on mounting height and furnishings.
Masking the lens: Opaque adhesive tape is supplied so that sections of the sensor's
lens can be masked. This restricts the sensor's view and allows you to eliminate
coverage in unwanted areas.
TOP
10ft
SIDE
0 7ft 15ft 25ft
Dense Wide Angle Lens (Standard)
up to 2000 sq ft for walking motion
Dense Wide Angle Lens (Standard)
up to 1000 sq ft for desktop motion
5ft
TOP
0
30ft
33.5ft
15ft
SIDE
0
67ft 38ft
Two-Sided Aisleway Lens (-3)
up to 134 linear ft for walking motion
55ft.
55ft
33.5ft
21ft 10ft 0 10ft 21ft 38ft
Aisleway Lens (-3)
pointed straight down
Call 800.879.8585 for Technical Support
16ft
TOP
8ft
0
8ft
SIDE
16ft
10ft
0
Long Range Lens (-1)
up to 90 linear ft for walking motion
3 ft
TOP
0
30ft
SIDE
15ft
15ft
0
0
67ft
One-Sided Aisleway Lens (-4)
up to 50 linear ft for walking motion
10 15ft
Long Range Lens (-1)
33° using MB-1 with
10 ft 0 10 ft 20 ft 30 ft 40 ft
Narrow Aisle Lens (-4)
using MB-1 bracket
with maximum rotation
55ft 85 90ft
maximum rotation
50 ft