4: Software Configuration - Kenwood UCR 420 Installation & User Manual

Kenwood 72X and 62X TrueX User's Guide

4: Software Configuration

4: Software Configuration
NOTE: No special software is required to operate your 72X or 62X TrueX™
CD-ROM Drive. The following section explains the general software configuration
procedure for Windows® 95. Windows® 98 will automatically recognize your 72X
or 62X TrueX™ CD-ROM Drive.
After the hardware installation and your system restart, Windows® 95/98 should
automatically find and install the appropriate drivers. The 72X or 62X TrueX™
CD-ROM Drive is Plug and Play, which means that in a Plug and Play system,
it will be recognized immediately by Windows® 95/98. If your system supports
Plug and Play, you should see a CD-ROM drive located under the 'My Computer'
icon after you boot up your system.
Page 13