Mounting Your Cd-Rom Drive - Kenwood UCR 420 Installation & User Manual

3: Hardware Installation
Step 7: MOUNTING YOUR CD-ROM DRIVE
To mount your 72X or 62X TrueX™ CD-ROM Drive, you will need to use the four
mounting screws included with your CD-ROM drive. The drive has four mounting
holes on each side and on the bottom (12 total). The mounting holes that you use
will depend on your computer's chassis design. In most cases, you will be using
two holes on each side of the CD-ROM drive. NOTE: DO NOT USE LONGER
SCREWS BECAUSE THIS COULD DAMAGE YOUR CD-ROM DRIVE!
Figure 3-1
CD-ROM drive mount
Page 10
Kenwood 72X and 62X TrueX User's Guide