Selecting Codes; User Codes; Modify Pin - Honeywell Galaxy 8 User Manual

User Guide
PIN + ent
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
ent
CODES

1 = User Codes

ent
001 USER
L3
ent
[ent] to Select

1 = Modify PIN

ent
001 PIN
> 5678
ent
001 PIN
> #5678
Indicates
Dual Code
001 USER
L3
DUAL CODES OPERATION
Entry of a single dual code cannot gain access to the menu, set or unset the system. The message
NO ACCESS – ADDITIONAL CODE is displayed. A second dual code must be entered
within 60 seconds to access the menu, set or unset the system. Dual codes can be of different
levels. The highest level code entered determines the access level to the system.
• GALAXY 60, 128, 500, 504 & 512
A single entry of a dual code, without a second dual code entry within 60 seconds, results in an
Illegal Code record in the EventLog. All outputs programmed as Illegal Code are activated.

SELECTING CODES

Enter the QUICK MENU. Press key 8 followed by the ent key.
USER CODES
When the CODES option has been selected, press key 1 to access User
Codes. Display each of the user numbers using key A>. Each user
number offers options for PIN, level, name and where applicable time
zones and groups. When the user number to be modified is displayed,
press the ent key to access the MODIFY PIN option.
MODIFY PIN
The MODIFY PIN option allows a pin to be assigned to a user or an
existing PIN to be modified. The PIN must be a four, five or six digit
number that is unique to the system. If a duplicate PIN is assigned, the
ð
message DUPLICATE ENTRY is displayed. As each digit is entered
it appears on the bottom line of the display. Pressing the * key erases
the last digit displayed. Continued pressing of the *key will erase all of
the digits. When the correct PIN has been assigned press the ent key to
accept the programming and return to the previous menu level.
When a PIN has been assigned to a user number, a solid box ( ) is
displayed on the line of the user number details screen.
• DELETING A PIN
Existing PIN entries can be completely erased using the * key instead
of a digit entry. When there is no PIN assigned to a user number a
hollow square ( ) is displayed in the top line of the users details
screen.
• ASSIGNING DUAL CODES
To program a user code as a Dual Code press the # key while the
Modify PIN option is selected. The # displays at the start of the
zz
assigned user PIN e.g. #5678. When a PIN has been assigned as a
dual code two solid boxes (
users details screen.
Galaxy 8/18/60/128/500/504/512
) are displayed in the top line of the
16