Seat Removal - Honda TRX420TM1 Owner's Manual

14 TRX420TM1 FM1 FM2-32HR36000.book 124 ページ ２０１３年８月２７日 火曜日 午後７時３７分

Seat Removal

Refer to Safety Precautions on page 113.
The seat must be removed for the air cleaner, engine oil filter, clutch,
spark plug, battery and fuse maintenance and to remove the rear
fender cover and tank cover assembly, to access the owner's
manual, air pressure gauge, tool kit.
(4)
(1) seat latch
(2) seat
(3) front prongs
Removal
1. Pull the seat latch (1) at the rear of the seat.
2. Slide the seat (2) back and lift it.
Installation
1. Insert the front prongs (3) into the hooks (4) on the frame and
press the studs (5) into the grommets (6).
2. Press down on the seat until locks.
124
Servicing Your Honda
(3) (2) (5)
(6)
(4) hooks
(5) studs
(6) grommets
(1)