Honda TRX420TM1 Owner's Manual page 229

14 TRX420TM1 FM1 FM2-32HR36000.book 221 ページ ２０１３年８月２７日 火曜日 午後７時３７分
Installation
1. Position the wheel.
2. Position the wheel nuts so that the tapered sides face the wheel
rim (2).
3. Hand-tighten the wheel nuts on the wheel, then lower the ATV
to the ground before tightening the nuts in a crisscross (rather
than circular) pattern to the specified torque:
64 N·m (6.5 kgf·m , 47 lbf·ft)
If a torque wrench was not used for installation, see your dealer as
soon as possible to verify proper assembly. Improper assembly may
lead to loss of braking capability.
If You Have a Flat Tyre
Taking Care of the Unexpected
221