KTI KGS-800L User Manual

Advertisement

Quick Links

KGS-800L Ver.D
Gigabit Ethernet Switch
U
s
e
r
'
s
G
u
i
d
e
U
s
e
r
'
s
G
u
i
d
e
DOC.080114

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KGS-800L and is the answer not in the manual?

Questions and answers

Summary of Contents for KTI KGS-800L

  • Page 1 KGS-800L Ver.D Gigabit Ethernet Switch ’ ’ DOC.080114...
  • Page 2 . Introduction The 10BASE-T/100BASE-TX/1000BASE-T Switches which are high-performance Gigabit Ethernet Switches designed for the network core. It provides 8 10BASE-T/100BASE-TX/1000BASE-T ports that can significantly improve the performance of your network’s backbone, and deliver the throughput needed to support a broad range of advanced network applications. With Switches high performance band-width, it provides the quickest solution to meeting the growing demands on your network’s limited resources.
  • Page 3 .Package Contents User Manual. Power Adapter. 10/100/1000Mbps Gigabit Ethernet Switch. . Hardware Introduction 4.1 Front Panel POWER LED This LED light is on when power is present. 8 Port LED Indicates the status of each of the 8 ports. Speed 100 Mbps LED A green LED indicates the speed is 100 Mbps.
  • Page 4 4.2 Rear Panel DC-input connect power adapter 8 Port Gigabit Switch connect computers, hub’s, switches or other devices.
  • Page 5 Specifications IEEE 802.3 10Base-T Standards IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T - Ethernet : 10Mbps (half-duplex) 20Mbps (full-duplex) - Fast Ethernet : 100Mbps (half-duplex) Data Transfer Rate 200Mbps (full-duplex) - Gigabit Ethernet : 1000Mbps (half-duplex) 2000Mbps (full-duplex) 8 x 10/100/1000Mbps Auto-MDI/MDI-X Ports Interface Power, Link / ACT, 100Mbps / 1000Mbps Diagnostic LED...
  • Page 6 . FCC Warning This equipment has been tested and found to comply with the regula-tions for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications.

This manual is also suitable for:

Kgs-500

Table of Contents