Motorola RVA50UL User Manual page 36

Programming Mode and return to the normal
radio operation.
Note:
• To exit the programming mode without saving,
turn OFF the radio.
• If you 'roll-over' to the beginning of 'Idle'
Programming Mode, you will hear "Channel
Number" and the LED Indicator blinks green
again. All changed values will be automatically
saved.
34
English
Programming Mode FAQ
1. I got distracted while programming and forgot
which feature I was programming. What should
I do?
Return to 'Idle' Programming Mode and start
over. You will not be able to return to
Programming Mode (the radio does not provide
further way to let you know the specific stage
you are at in the Programming Mode).
Therefore you can:
• Long press the PTT button. The radio will return
to 'Idle' Programming Mode or,
• Turn OFF the radio and enter Programming
Mode again. (Refer to "Entering Advanced
Configuration Mode" on page 32 for more
information)
2. I am trying to program a frequency (or a code)
value but the radio would not do it. It rolled over
and took me back to value '0'.
The radio disallow you to program any value
that is not available in the frequencies and