Connection Examples - Sony CMA-10 Service Manual

CMA-10/10CE
CONNECTION EXAMPLES
CONNECTION WITH ONE CAMERA
o*
DXC-102/102P
color video camera
REMOTE | CMA-10/10CE
REMOTE
= DC IN
== DC OUT
VIDEO OUT
+ Cable identification
@ +*75-ohm coaxial cable 3C-2V (with BNC (3)
AC power cord
(supplied)
connectors)
This connection is not necessary if remote control of the Video monitor
white balance and pedestal level adjustments is not to an AC outlet
required.
@**75-ohm coaxial cable 5C-2V (with BNC
connectors)
Set the CABLE COMP selector to the appropriate position,
depending upon the length of this cable. ;
@75-ohm coaxial cable (any type) (with BNC
connectors)
to video input
SYSTEM CONNECTION USING TWO CAMERAS
DXC-102/102P
color video camera
to VBS or BS
signal output
=: DC IN =e
VIDEO OUT VIDEO IN
GEN LOCK IN
75-ohm coaxial ——_—
Cable 3C-2V
(with BNC connectors)
AC power cord (supplied)
————— to an AC outlet
to VBS or BS signal input
DXC-102/102P
CMA-10/10CE
to video input
VIDEO OUT
GEN LOCK IN
; Video monitor
AC power cord (supplied) \ wm to an AC outlet