> 6 s
•
Release the button.
• Press the button again for approx. 3 seconds until
the LED flashes very slowly.
> 3 s
• Release the button.
• The LED expires after a short time and the factory
settings of the device will be restored.
52
Power
Reset
A
B
1.3
1.7
+24 V
GND
1.4
1.8
Power
Reset
A
B
1.3
1.7
+24 V
GND
1.4
1.8
9
Disassembly
• Before disassembling the HomeMatic RS485 Gate-
way, disconnect the wiring.
• Press down the clip at the back of the device with
a slotted screwdriver and remove the device from
the rail.
10 Maintenance and cleaning
The product does not require any maintenance. Re-
pairs are only to be done by trained professionals.
53