Basic Call Features; Place A Call - Depaepe Telecom UC802P User Manual

Basic Call Features

Place a Call

There are three ways to dialing a call: Handset, Headset and Hands-free speakerphone.
To place a call by Handset
Pick up the handset, or press a line key and dial the necessary number.
Press or press the send softkey, then the call is sending.
To place a call by Headset:
Press the ( light is Green),
Enter the desired number.
Press or press the Send softkey, then the call is sending.
Placing a call by hands-free speakerphone
Press the , or press the Line key, then you can hear the dial tone.
Press the number.
Press or press the Send soft key, then the call is sending.
To place a call by call history or Directory
Press the History soft key (On the idle page) or Menu -> History /Directory
Press and to select the targeted one.
Press Send soft key to make the call.
Note:
The key is set to be a send key. You can set the * key as send key or set some
other to be as send keys. For more information, refer to the Key as Send on page
During the call, you can also change among Headset, Handset or Free-speaker mode.
SAS HENRI DEPAEPE - 75/77 Rue du Pré-Brochet - 95110 Sannois - France
Tel +33(0)1 3025 8160 - Fax +33(0)1 3998 6124 -
Advanced Features
contact@depaepe.com
29