Disc Playback - Yamaha TSX-140 Owner's Manual

Desktop audio system
Hide thumbs Also See for TSX-140:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
TROUBLESHOOTING
iPod
Problem
No sound
The iPod does not charge up.
Flashing iPod indicator twice
is repeated 3 times after
connecting the iPod.
Synchronization with iTunes
cannot be performed using
this unit.

Disc playback

Problem
Disc cannot be inserted.
Some button operations do
not work.
Playback does not start
immediately after pressing
.
CD indicator repeats flashing
twice 3 times, and the disc is
unloaded.
"Err" is displayed in the front
panel display after loading a
disc.
14
En
Cause
The iPod is not set in the iPod dock
firmly.
Earphones are connected.
The iPod software version has not been
updated.
The iPod is set in the iPod dock
improperly.
The system is set to power save mode
(☞ P. 2).
The iPod being used is not supported by
the unit.
Depending on the PC or USB cable,
signal damping is increased and the
connection might be failed.
Cause
The system is set to power save mode
(☞ P. 2).
The disc loaded into the unit may not be
compatible.
The disc may be dirty.
The disc loaded into the unit may not be
compatible.
If the unit was moved from a cold to
warm place, condensation may have
formed on the disc reading lens.
The disc loaded into the unit may not be
compatible.
The disc may be dirty.
The disc is loaded back to front.
The disc does not contain playable files. Use a disc contains playable files
An error occurs in the unit.
Solution
Set the iPod firmly.
Remove the earphones.
Download the latest iTunes software to
update the iPod software version to the
latest.
Remove the iPod from the unit, and then set
it in the iPod dock again (☞ P. 2).
Press
to cancel the power save mode.
Use a supported iPod (☞ P. 17).
Use shorter USB 2.0 cable.
Solution
Press
to cancel the power save mode.
Use a disc supported by the unit (☞ P. 16).
Wipe the disc clean.
Use a disc supported by the unit (☞ P. 16).
Wait for an hour or two until the unit
adjusts to the room temperature, and try
again.
Use a disc supported by the unit (☞ P. 16).
Wipe the disc clean.
Insert a disc facing the label side to near
side.
(☞ P. 16).
Unload the disc with
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents