Installation; Electrical Connection - Baumatic BO988BL Instruction Manual

INSTALLATION

The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o UK Regulations and Safety Standards or their European Norm
Replacements.
o Building Regulations (issued by the Department of the
Environment).
o Building Standards (issued by the Scottish Development
Department).
o IEE Wiring Regulations.
o Electricity At Work Regulations.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance should be wired into a 30 A (BO996SS) or 20 A
(BO988BL and BO992SS) double pole switched fused spur
outlet, having 3 mm contact separation and placed in an easily
accessible position adjacent to the appliance. The spur outlet
must still be accessible even when your oven is located in its
housing.
o To connect the oven power cord, loosen and remove the cover
on the terminal block, in order to gain access to the contacts
inside. Make the connection, securing the cord in place with the
cable clamp provided and then immediately close the terminal
block cover again.
o Take care not to dislodge the hinge locking
system when removing the door, as the
hinge mechanism has a strong spring.
o Do not immerse the door in water at any
time.
27