Specifications - Sony Trinitron PVM-14M2MDJ Instructions For Use Manual

Specifications

Video signal
For PVM-14M2MDU/14M2MDE/14M2MDA/
20M2MDU/20M2MDE/20M2MDA:
Color system NTSC, PAL
Resolution 600 TV lines
Aperture correction 0 dB to +6 dB
Frequency response
LINE 10 MHz ± 3 dB (Y signal)
RGB 10 MHz ± 3 dB
Synchronization AFC time constant 1.0 msec.
Picture performance
For PVM-14M2MDU/14M2MDE/14M2MDA:
Normal scan 7 % over scan of CRT effective screen
area
Under scan 5 % underscan of CRT effective screen
area
Over scan 20 % over scan of CRT effective
screen area
H. linearity Less than 4.0 % (typical)
V. linearity Less than 4.0 % (typical)
Convergence
Central area: Less than 0.4 mm (typical)
Peripheral area: Less than 0.5 mm (typical)
Raster size stability H: 1.0%, V: 1.5%
High voltage regulation
3.5 %
Color temperature D65/D56/D93, selectable
USER (3,200K–10,000K, factory
setting is D65)
For PVM-20M2MDU/20M2MDE/20M2MDA
Normal scan 7 % over scan of CRT effective screen
area
Under scan 5 % underscan of CRT effective screen
area
Over scan 20 % over scan of CRT effective
screen area
H. linearity Less than 5.0 % (typical)
V. linearity Less than 5.0 % (typical)
Convergence
Central area: Less than 0.6 mm (typical)
Peripheral area: Less than 1.0 mm (typical)
Raster size stability H: 1.0%, V: 1.5%
High voltage regulation
4.0 %
Color temperature D65/D56/D93, selectable
USER (3,200K–10,000K, factory
setting is D65)
Inputs (common to all models)
LINE A
VIDEO IN BNC connector, 1Vp-p ±6 dB, sync
negative
AUDIO IN Phono jack (×1), –5 dBu
47 kilo-ohms
LINE B
Y/C IN 4-pin mini-DIN (×1)
See the pin assignment on page 37.
AUDIO IN Phono jack (×1), –5 dBu
47 kilo-ohms
RGB/COMPONENT A/B
R/R-Y,G/Y,B/B-Y IN: BNC connector (×3)
R, G, B channels: 0.7 Vp-p, ±6 dB
Sync on green: 0.3 Vp-p, negative
R-Y, B-Y channels: 0.7 Vp-p, ±6 dB
Y channel: 0.7 Vp-p, ±6 dB
(Standard color bar signal of 75%
chrominance)
AUDIO IN Phono jack (×1), –5 dBu
47 kilo-ohms
EXT SYNC IN BNC connector (×1)
4 Vp-p, ±6 dB, sync negative
REMOTE D SUB 9 PIN (×1), 8 PIN MIN DIN
(×1)
See the pin assignment on page 37.
a) 0 dBu = 0.775 Vr.m.s.
Outputs (common to all models)
LINE A
VIDEO OUT BNC connector (×1) loop-through,
Automatic 75 ohms termination
AUDIO OUT Phono jack loop-through
LINE B
Y/C OUT 4-pin mini-DIN (×1) loop-through,
Automatic 75 ohms termination
AUDIO OUT Phono jack (×1) loop-through
RGB/COMPONENT A
R/R-Y,G/Y,B/B-Y OUT: BNC connector (×3)
loop-through
Automatic 75 ohms termination
AUDIO OUT Phono jack (×1) loop-through
EXT SYNC OUT BNC connector (×1)
Automatic 75 ohms termination
DC OUT 8 V/0.8A
Speaker output Output level: 0.8 W
a)
, more than
a)
, more than
a)
, more than
35