Advertisement
17 Servo Installation-Part2
Assembly Tip: Remove all the servo wheels prior to attaching the steel linkage
balls. Make sure all linkages are the correct length.
(1) HSE2612N Self Tapping Screw(M2.6x12).... 8
(2) HMF2-8N Screw(M2x8)................................ 3
(3) HML2 Hex Nut(M2)...................................... 3
(4) BK0075 Linkage Ball.................................... 3
(5) BK0094 Linkage Rod .................................. 1
(6) BK0092 Linkage Rod .................................. 1
(7) BK0086 Ball Link.......................................... 4
51mm
18 Receiver/Gyro Installation
Thunder Tiger recognizes that there are many brands of radios and gyros to choose from. You are encouraged to
seek the advice of experienced helicopter pilots when making this decision. We do recommend the use of the Thunder
Tiger TG-8000 piezo Gyro since it was designed expressly for this machine.
(1) BE1052 Antenna Tube................... 1
(2) BK0106 Double Sided Tape.......... 2
Thunder Tiger TG-8000 piezo
gyro is recommended
(2) BK0106
Pitch Servo
(7) BK0086
(6) BK0092
(3) HML2
(4) BK0075
(1) HSE2612N
(2) HMF2-8N
Throttle Servo
(1) HSE2612N
(2) HMF2-8N
(1) BE1052
Mount the Steel Link
Ball at 10.5mm(approx
7/16") from the center
of the servo horn.
(3) HML2
(4) BK0075
15
(4) BK0075
(7) BK0086
(5) BK0094
(1) HSE2612N
On/Off Switch Face Plate
(3) HML2
(2) HMF2-8N
75mm
On/Off Switch
Gyro Amplifier
(2) BK0106
Receiver
(2) BK0106
Battery Pack
(2) BK0106
Hide quick links:
Advertisement
