Use Of The Nutri Ninja Cups - Ninja BL450EU Owner's Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 22
Use of the Nutri Ninja
WARNING: Never leave the appliance unattended while in use.
CAUTION: Pro Extractor Blades
Extractor Blades, do not hold the blades, always hold by the base of the blade assembly.
CAUTION: DO NOT BLEND HOT LIQUIDS. Allow the liquids and foods to cool to room temperature before
blending.
IMPORTANT: Make sure that the motor base is plugged in for use.
IMPORTANT: When processing soft dry ingredients such as day-old bread or cheese use quick, short 1 second
pulses. Do not overfill to avoid overheating the appliance. Allow the appliance to cool after each use.
ASSEMBLY
or
or
Fig. 1
Fig. 2
1
Place the motor base on a clean, dry, level surface such
as a counter or table top.
2
Make sure that the motor base is plugged in for use.
3
Add ingredients to the cup.
NOTE: Do not overfill! to avoid spilling, do not add
ingredients past the "MAX" fill line.
4
Place the Pro Extractor Blades onto the cup and twist it
on tightly until you have a good seal. (Fig. 1)
5
Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
Turn it clockwise, the unit is ready for use. (Fig. 2)
6
Press down on the top of the cup in short intervals to
activate. (Fig. 3)
28
Cups
®
are sharp and removable, handle with care. When handling the Pro
USE
Fig. 3
Fig. 4
7
When you have reached your desired consistency, stop
the appliance by removing your hand from the cup.
8
To remove the cup, ensure that the motor has stopped
running. Then turn the cup anticlockwise (Fig. 4) and
pull straight up to remove. (Fig. 5)
9
Turn the cup upright and remove the Pro Extractor
Blades by twisting the Pro Extractor Blades
anticlockwise. Be sure to store the Pro Extractor Blades
attached to an empty cup when not in use.
10 Twist the Sip & Seal
®
drink on the go. Press flip top cap firmly into the
opening to get the best seal. The flip top cap locks open
when pressed backward.
11 Make sure that the motor base is unplugged when not
in use.
REMOVAL
Fig. 5
lid onto the cup to enjoy your

Advertisement

Table of Contents
loading

Table of Contents