Fig.11 - Makita GA4030R Instruction Manual

Installing side grip (handle)
CAUTION:
Always be sure that the side grip is
installed securely before operation.
Fig.3
Installing or removing wheel guard
/ abrasive cut-off wheel, diamond
wheel)
WARNING:
When using a depressed center
the closed side of the guard always points toward
the operator.
WARNING:
When using an abrasive cut-off
/ diamond wheel, be sure to use only the special
wheel guard designed for use with cut-off wheels.
For tool with locking screw type
wheel guard
Fig.4: 1.
For tool with clamp lever type wheel
guard
an angle that it can protect the operator according to
work.
Fig.5: 1.
4.
Fig.6: 1. Screw 2.
-
2. 3. Screw
2. 3. Screw
-
Installing or removing depressed
Optional accessory
WARNING:
on the tool so that the closed side of the guard
always points toward the operator.
CAUTION:
Make sure that the mounting part
Fig.7: 1.
3.
Fig.8: 1.
in reverse.
Optional accessory
Only for tools with M14 spindle thread.
-
Optional accessory
WARNING:
-
Fig.9: 1.
-
4.
Installing or removing abrasive disc
Optional accessory
Fig.10: 1.
3.
1.
2.
3.
wrench.
9 ENGLISH
When using a depressed center
2. Depressed center wheel
4.
2. Shaft lock
Always use supplied guard when
2. 3.
2.
-