ATEN CS9134 User Manual page 39

Setting
CLEAR THE
NAME LIST*
RESTORE DEFAULT
VALUES*
LOCK CONSOLE*
* If a password has been set, this setting requires you to supply it in order to
gain access. See SET PASSWORD, page 26, and OSD Security, page 28, for
details.
Clears all Port Names from the Name List. You are asked
to confirm before the procedure goes on. Key in Y, then
press [Enter] to confirm. While the names are being
cleared, a message appears on the display to indicate so.
After the names have been cleared, another message
appears to indicate that the procedure completed
successfully.
Clears all settings from memory, and returns the unit to the
factory default settings (see OSD Factory Default Settings,
page 32). You are asked to confirm before the procedure
goes on. Key in Y, then press [Enter] to confirm. While the
settings are being cleared, a message appears on the
display to indicate so. After the settings have been
cleared, another message appears to indicate that the
procedure completed successfully.
Locks / Unlocks the Console. When the Console is locked,
only the current monitor screen displays. Attempts to input
information from the console have no effect; attempts to
switch to a different port, either from the Console or by
pressing the manual switches, have no effect either. The
only way to regain access to the systems is by Unlocking
the Console. If a password has been set, you must provide
the password in order to Lock / Unlock the Console. If no
password has been set, pressing [Enter] will Lock / Unlock
the Console.
4. OSD Operation
Function
27