Using Your Skillet - Dash DTGS14 Instruction Manual & Recipe Manual

USING YOUR SKILLET

Clean the Skillet and all of its components prior to assembly and use.
DO NOT use the Skillet near water or other liquids, with wet hands, or while
standing on a wet surface. Do not touch the Base or Non-stick Pan without heat
protective cooking gloves while the Skillet is hot.
ATTACHING THE KNOB
USING YOUR SKILLET
1. Set the Base on a clean, stable, and dry surface.
2. Unwind the power cord to the preferred length. Inspect the cord for any
sign of damage or significant wear.
3. Plug the Control Probe into the Socket located on the Base of the Skillet.
Be sure to properly align the Control Probe Connector with the middle
hole before pushing the Probe in.
8 ∙ bydash.com ∙ using your skillet
1. Push the screw through the back of the Lid and the
base of the Knob.
2. Holding the screw in place with two fingers, attach the
Knob
3. Turn the Knob clockwise to tighten. DO NOT
overtighten the Knob. We do not recommend using
a screwdriver as this may increase the risk of over
tightening and damaging the Lid.