To Insert A Memory Card - Hasselblad H6D User Manual

USER GUIDE
48
Overview

TO INSERT A MEMORY CARD

Insert CFast card
Open the CFast card cover (1) on the sensor unit by inserting
a thumb in the recess and then sliding the slot cover backwards.
Behind the cover, you will see a cover for the CFast card (2) and
a cover for the smaller SD card (3).
Hold the CFast card so that the connector holes face into the
slot and you can read the brand label when you are behind the
camera.
1
Gently press the CFast card into the slot. If you encounter
resistance, it might be because you are holding the card
backwards or upside down.
If the card can be easily inserted nearly all the way into the
back, then you are inserting it correctly. Press the card another
couple of millimetres firmly into place.
Close the slot cover and slide it to the right to lock it.
Insert SD card
When the card slot cover door is opened, mount the SD card in
the SD card slot (3).
Close the slot cover and slide it forward to lock it.
4 3
H6D www.hasselblad.com