Table of Contents
Advertisement
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe
dry.
3 Place the pitcher, bowl and single serve cup in the
dishwasher. Place the lids and attachments on
the top rack. Use caution when handling the
blade assemblies as the blades are very sharp.
Always hold the top blades and chopping
blade by the shaft.
NOTE: You may also wash the containers by
filling ¾ of the container with warm water and a
drop of dish washing detergent, placing the lid or
single serve blade assembly on and pressing the
pulse button a few times. Once clean, remove the
container from the motor base. Rinse the pitcher,
bowl, single serve cup and lids under running
water. Allow all the parts to dry before storing.
HOW TO STORE
1 Store the Ninja Ultima
pitcher on the motor base, top blades inside the
pitcher and lid on the pitcher. Store the Chopping
blade in the 1.8 L bowl with the lid on the bowl.
Store the discs and dough blade in a secure
location.
RESETTING THE MOTOR THERMOSTAT
The Ninja Ultima
System features a unique safety
™
system which prevents damage to the unit's
motor and drive system should you inadvertently
overload your appliance. If the appliance is being
overloaded, the motor will stop. To reset the
appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 If using the top blades or the chopping blades,
carefully remove them by the shaft, ensuring that
no food is jamming the top or bottom cutting
blades.
CAUTION: The blades are extremely sharp - handle
with care! Always hold the top blades and
chopping blades by the shaft.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base, carefully
re-insert the top blades (if using) and
re-plug the appliance into the electrical outlet.
NOTE: Ensure that the blades are seated properly
by standing the blades upright in the jar. If the
blades are not seated properly on the star-shaped
post, carefully check the underside of the top blade
assembly to ensure there's no food in the way.
Rinse if necessary. Do not operate if the top blades
are not upright at any time.
5 Proceed to use the appliance as before, making
sure not to exceed the recommended maximum
capacities.
System upright with the
™
16
Advertisement
Table of Contents
