Icemaker Use Instructions (Only On Models With An Icemaker) - Haier AFD630IX Instructions For Use Manual

ICEMAKER USE INSTRUCTIONS (ONLY ON MODELS WITH AN
ICEMAKER)
1. PREPARATIONS BEFORE USING THE ICEMAKER

Cut the water pipe to desired length while ensuring it is free from excessive bends.
Generally its total length should not be more than 5m. A longer pipe may reduce water
pressure and, as a result, the water output flow-rate and ice-making capacity.

The water pipe should be away from any heat sources as it is not heat-resistant.

The water pipe should be installed and tested by authorized professional personnel.

The icemaker should be connected to a water source of a pressure between 1.5bar and
7bar.
2. CLEANING THE ICE CUBE TRAY
 Deactivate the ice machine function from
the display panel, take out the icemaker
assembly Turn the icemaker over and
you will see the ice cube tray.
 Pull the elliptical fastener of the icemaker
in direction (1).
 Take out the ice cube tray in direction (2).
 After cleaning, install it back in reversed
direction, push the ice machine firmly into
space, close the freezer door, and
activate the ice machine function from
the display panel.
3. PRECAUTIONS
 Never install the icemaker's water tube in an area with the ambient temperature below
o
0 C to avoid the tube freezing.
 The icemaker will start ice cube making when the internal temperature reaches or is
o
below -12 C . (If the icemaker is used for the first time or after an extended period of
vacation, the first loads of cubed ice should be discarded as there maybe impurities in
the water tube).
 After the appliance is located, the water tube should be placed to prevent it from being
crushed.
 Installation of the icemaker can only be carried out by an authorized service agent.
 This icemaker can only be supplied with drinking water.
4. OPERATING PRINCIPLE OF THE ICEMAKER
8 cubed ices are made in every cycle. The ice making capacity depends on ambient
temperature, door-opening frequency, water pressure, freezer temperature and other
conditions. To ensure that the storage box is fully filled with cubed ice, arrange the cubed
ice in the drawer frequently.
As the icemaker makes 8 cubes in one cycle, it is normal that some of them stick to each
other (This can be improved by decreasing water supply fill duration).
5. IF THIS IS YOUR FIRST ICEMAKER
Some "crack" sounds may be heard in the process of ice making. Don't worry, it's normal.
22