Haier AFD630IX Instructions For Use Manual page 18

USE OF THE SLIDING SHELF
Fig. (1) shows the extended state of the sliding shelf
used to store small food containers.
Fig. (2) shows the retracted state of the sliding shelf
which allows for taller food containers below.
To slide the shelf from state (1) to state (2), simply push
structure "a" upwards, and push structure "b" inwards in
the direction of the arrow shown in the figure so it slides
under structure "a".
To extend the shelf from state (2) to state (1), push
structure "a" upwards, and pull structure "b" in the
direction of the arrow shown in the figure.
USE OF THE WIRE WINE HOLDER
Fig. (1) shows the folded state of the wire wine holder.
In this state large space can be spared.
Fig. (2) shows the extended state of the wire wine
holder. In this state it can hold several wines.
To extend it from state (1) to state (2), simply pull the
wire down. The maximum load of the bottle holder is
10 kg.
To fold it from state (2) to state (1), simply push the
wire up
RECOMMENDED STORAGE AREAS FOR
VARIOUS FOODS
As cold air circulates inside the refrigerator,
there is temperature difference inside the
fridge storage compartment. Different foods
should be placed in different areas according
to their properties.
(1) Eggs, butter, cheese and etc.
(2) Drinks, canned food and etc.
(3) Seasonings and pickled food
(4) Beverages, canned food, cake, etc.
(5) Wine, champagne, etc.
(6) Milk, cheese, etc
(7) Cooked meat, fresh fish and meat,
etc.
(8) Fruit, vegetables, salad, etc.
LAMP IN THE FRIDGE STORAGE COMPARTMENT AND ITS REPLACEMENT
The lamp is 12 volts 5W max (the power depends on the model) featuring low energy
consumption. If there is any abnormality, please contact an Authorized Service Centre. Do
not attempt to repair or replace the lamp.
18