Liquid Image Explorer Series User Manual page 10

Estimated Battery life for Alkaline and Lithium AAA batteries
Alkaline AAA Battery
Still image mode: up to 400 pictures
Video clip recording mode: up to 30 minutes
Lithium AAA (Energizer®) Battery
Still image mode: up to 4000 pictures
Video clip recording mode: up to 250 minutes
3.2 Inserting Micro SD Card (OPTIONAL STEP - Recommended)
NOTE: A Micro SD Memory Card is not included with your camera. It is
recommended that you purchase a commercially sold Micro SD Card to increase
the memory. This CAMERA MASK works with a Micro SD/SDHC card up to 32 GB.
Carefully read the instructions and warning that come with the card.
Approximate File Storage
Internal 32MB Memory
Images:
Video:
* included memory
To insert a Micro SD Memory Card into your CAMERA MASK:
1. Locate the MEMORY COMPARTMENT on the top of the CAMERA MASK. (This
compartment also houses the USB port.)
2. Open the MEMORY COMPARTMENT.
3. Locate and remove the rubber DRIP GUARD. CAUTION: Do not lose this part.
The DRIP GUARD is part of the water proofing system.
4. Insert the Micro SD/SDHC Card in accordance with the diagram next to the card
port.
CAUTION: Liquid Image Co, LLC is not responsible for damage to the CAMERA MASK or to
the memory card if the card is inserted improperly.
5. Reinsert the rubber DRIP GUARD into the MEMORY COMPARTMENT.
6. Close the MEMORY COMPARTMENT to the water proof range marked on the
mask housing (detail pg5). Do not overtighten cap.
27-30
47-52 seconds
ENG-8
Micro SD Card 1GB
Images: 1100 - 1400
Video: 28 - 35 minutes