Advertisement
6. Attach the bottom leg using the correct bolts and
washers as shown above. Once the bottom leg is
secured to the piano, one person may need to lift the
front of the piano slightly so that the other person
may remove the blanket from under the piano.
8. With your piano placed in its final position, locate the two pedal feet on the bottom of the lyre as shown
in the picture below. Turn each foot counter-clockwise until they make firm contact with the floor surface.
If you relocate the piano in the future, be sure to raise the pedal feet back up by turning them clockwise pri-
or to doing so to avoid damage to the pedal feet and lyre assembly.
PIANO ASSEMBLY (CON'T)
!
ADJUSTING THE PEDAL FEET
7. Once the blanket is removed from underneath
of the lyre, locate the CAT5 cable that is attached to
the lyre. Plug the CAT5 cable into the receptacle as
shown in the picture. (fig 1) Locate the AC power
chord receptacle underneath of the piano and plug in
the provided power cable. (fig 2)
(fig 1)
(fig 2)
Advertisement
