Tire Pressure - MTD 737-0168 Operator's Manual

Tire Pressure

• Before operating, check tire pressure and reduce
pressure to between 15 psi and 20 psi.
NOTE:
If the tire pressure is not equal in both tires, the
unit may pull to one side or the other.
Auger Control
Refer to Auger Control Test on Page 11 to adjust the auger
control.
Chute Assembly
The distance snow is thrown can be adjusted by
changing the angle of the chute assembly. To do so,
stop the engine by removing the ignition key and loosen
the plastic wing knob found on the left side of the chute
assembly. Pivot the chute upward or downward before
re-tightening the wing knob. See Figure 6.
14
Figure 6