Settings | Signal - NEC VE303 User Manual

"SIGNAL" is only

supported in Analog
VGA (RGB) signal.
SETTINGS |
SIGNAL
PHASE
Synchronize the signal timing of the display with the graphic card.
If the image appears to be unstable or flickers, use this function to
correct it.
PHASE
CLOCK
Change the display data frequency to match the frequency of
your computer's graphic card. Use this function only if the image
appears to flicker vertically.
CLOCK
H. POSITION
Press the button to move the image left.

Press the button to move the image right.

H. POSITION
User Controls
IMAGE
GENERAL
PHASE
CLOCK
H. POSITION
V. POSITION
SELECT
COMPUTER
EXIT EXIT
EXIT EXIT
EXIT EXIT
SCREEN SETTINGS
SIGNAL ADVANCED
EXIT MOVE
ADJUST
ADJUST
ADJUST
51
OPTIONS
MOVE
... English