Table of Contents
Advertisement
Troubleshooting
If you experience trouble with the projector, refer to the
following information. If the problem persists, please contact
your local dealer or service center.
Problem: No image appears on screen
Ensure all the cables and power connections are correctly and
securely connected as described in the "Installation" section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. Please
refer to the "Replacing the lamp" section.
Make sure the projector is switched on.
Ensure that the "AV-MUTE" feature is not turned on.
Problem: Partial, scrolling or incorrectly displayed image
Press "AUTO ADJ." on the remote control.
If you are using a PC:
For Windows Vista:
1. From the "My Computer" icon, open the "Control Panel" folder,
and double click the "Appearance and Personalization".
2. Select "Personalization".
3. Click "Adjust screen resolution" to display "Display Settings".
Click on the "Advanced Settings".
For Windows 7:
1. From "Start" menu, open "Control Panel".
2. From drop-down menu select "Display".
3. Click "Adjust resolution".
If the projector is still not projecting the whole image, you will
also need to change the monitor display you are using. Refer to
the following steps.
4. Verify the resolution setting is less than or equal to 1280 x 1024
resolution.
Appendices
65
... English
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
