Installing The Cover; Removing The Front Bezel; Installing The Front Bezel; Removing The Memory - Dell Vostro 3252 Owner's Manual

Installing the Cover

1. Slide the cover from the back of the computer, until the latches snap-in.
2. Tighten the screws to secure the cover.
3. Follow the procedures in

Removing the Front Bezel

1. Follow the procedures in
2. Remove cover.
3. Follow the steps to remove the cover:
a. Lift the retention clips [1] and release the front bezel [2].
b. Lift up the front bezel to remove it from the computer [3].

Installing the Front Bezel

1. Hold the bezel and ensure that the hooks on the bezel snap into the notches on the computer.
2. Rotate the front bezel toward the computer.
3. Press the front bezel until the tabs snap in.
4. Install the cover.
5. Follow the procedures in

Removing the Memory

1. Follow the procedures in
2. Remove the cover.
3. Pry the securing clips away from the memory module until it pops up. Remove the memory module
from its socket on the system board.
After Working Inside Your Computer
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.
9