Flushing Device; Install Cowling - Yamaha 90A Owner's Manual

should supply oil normally. If no oil is
flowing after 10 minutes of idling, consult
your Yamaha dealer.
ECM00130
NOTICE
Be sure to take the above steps when op-
erating the engine after a long period of
storage. Otherwise engine seizure could
occur.
EMU36490

Flushing device

Check that flushing device's garden hose
connector is securely screwed on to the fit-
ting on the bottom cowling. NOTICE: If the
flushing device is not properly connect-
ed, cooling water can leak out and the en-
gine can overheat during operation.
[ECM01800]
1
1. Flushing device
EMU36961

Install cowling

1. Be sure that all cowling lock levers are
released.
2. Be sure that the rubber seal is seated all
the way around the engine.
3. Place the cowling on top of the seal.
4. Check to be sure the rubber seal fits cor-
rectly all the way around the engine.
5. Move the levers to lock the cowling as
shown. NOTICE: If the cowling is not
installed correctly, water spray under
ZMU03367
the cowling can damage the engine,
or the cowling can blow off at high
speeds.
After installing, check the fitting of the top
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
Yamaha dealer.
ZMU03857
Operation
[ECM01990]
ZMU06118
ZMU04678
35