Unit Select (C10); Trip Reset (C11); Gps Info (C12); Service Menu - Vetus ECGPS Operation Manual And Installation Instructions

4.1.10 Unit select (C10)

For distances resp. speed you can select
either km resp km/h or miles resp. knots.
• Press in the default mode to enter
the menu.
• Use the /
the Unit select menu (C10).
• Press to enter the Unit select
menu.
• Use the /
Km or Miles.
• Press
menu or
• Keep pressed for two seconds
to exit to the default mode.

4.1.11 Trip reset (C11)

To read the trip distance or to reset trip dis-
tance the Trip reset menu is to be used.
• Press in the default mode to enter
the menu.
• Use the /
the Trip reset menu (C11).
• Press to enter the Trip reset
menu.
• Use the /
Yes or No.
• Press
menu or
• Keep pressed for two seconds
to exit to the default mode.
20
100506.01
buttons to select
buttons to select
to return to the main
buttons to select
buttons to select
to return to the main

4.1.12 GPS info (C12)

Select this menu to view the number of
used GPS sattelites.
• Press in the default mode to enter
the menu.
• Use the /
the GPS info menu (C12).
• Press to enter the GPS info
menu.
• Press
menu or
• Keep pressed for two seconds
to exit to the default mode.
4.2

Service menu

To enter the service menu you have to
press when you switch the power
on.

4.2.1 Display info

Press to view: Display type, interface,
software version.

4.2.2 Compass info

Press to view: Compass type, inter-
face, software version.

4.2.3 Display reset

Press to reset the display to factory
settings, except for the log.

4.2.4 Compass reset

Press to reset the compass to factory
settings.

4.2.5 Segments check

Press to turn on all segments to
check for faulty segments
4.2.6

Demo mode

Press to run demo mode.

4.2.7 Close menu

To exit the service menu press
Electronic Compass / GPS ECGPS
buttons to select
to return to the main
.