eQ-3 MAX! Cube Operating Manual page 19

• The power LED lights up continuously once the self-
test has been successfully completed and the power
supply is present.
2. Connect the MAX! cube to the router/PC:
• Connect the MAX! cube to a router. To do this, plug the
network cable supplied with the device into the designa-
ted port (1) on the side of the MAX! cube (see diagram
on page 16). Connect the other end of the cable to a free
slot on your router.
• Connect the router to your PC.
• The Internet LED starts to flash as soon as the connec-
tion to the router is active.
• After a brief delay, the Internet LED lights up continuous-
ly. The connection to the MAX! Portal is active and the
MAX! cube is now ready for operation.
Alternatively, the MAX! cube can be supplied with
power via a USB port on a router or a computer. Ple-
ase note that in the case of some models, the USB
voltage is no longer available once the device has
been switched off.
19