Gadspot GS-N621 User Manual page 30

1. To add an event trigger, click on [Add] and setup panel will be expanded.
2. Give a name to this event.
3. Set the time interval between each trigger.
4. Set the time period for the trigger. Choose "Always" or "During time between" or "Never".
During time frame: Choose a day and the starting time then configure the duration time (168hrs = 24x7).
For example if duration time is set to 168(hrs), it is the same as choosing "Always"
Trigger types (conditions):
Motion Detection: The configured detection area(s) for motion events.
GPIN: the physically connected external trigger/button.
Manual Trigger: a virtual trigger button embedded on the web main page.
Period: set the time interval
5. The trigger condition is Motion Detection.
The responding actions can be "Upload images" and "Send Email Notification" and "Send Message
Notification (TCP)".and "Activate Output Port"
Select Upload type: Store image to FTP (Remote) / send E-mail
Activate Output Port: Activate Relay Output
Send Email Notification: Send Email Notification
Send Message Notification (TCP):
6. Click on [Save] to save the configuration mad
TCP Message Notification
29