Table of Contents
Advertisement
Advanced
White balance: the adjustment to compensate for different environments in terms of light source.
Exposure: Anti-flicker setting for image sensor to fit the frequency of light (power) source. For instance, the
power frequency is 50Hz for most European countries, while 60Hz is typically for US. This setting is therefore
regionally different. Note: Default setting is 50Hz
Max. Exposure Time: referring to the shutter speed.
Max. Gain Control: the amplification factor for the incoming light.
Infrared (IR) Cut Filter: the default is automatically switched according to light intensity. Normally, with plenty
of light sources (or sun light), there can be infrared included. The filter is automatically switched "Enable", to
avoid the image sensor from receiving the IR signal.
Color/Mono Mode: the default is automatically switched according to light intensity. It can also be forced to
21
Advertisement
Table of Contents
