Skin Sensitivity Test; How To Use Your Mē - Me chic User Manual

Skin sensitivity test

If you are using the mē for the first time or treating a
new body area, choose a small area close to the area
you intend to treat. The Skin Sensitivity Test should be
performed on LOW energy level:
• Prepare your skin for the test and follow the treatment
instructions.
• Wait 30 minutes and check your skin for any reaction. If
the skin appears normal, then you are ready to perform
a full treatment.
• If the treated spot appears red or irritated, please wait
24 hours and repeat the test. Otherwise consult your
doctor.
How to use your mē
If this is your first time using the device, be sure to conduct
the Skin Sensitivity Test.
Step 1:
Preparation
To prepare for your mē treatment:
• First remove hair from the area you want to treat.
• Clean your skin and dry it with a towel.
• This will ensure that the elōs technology is focused
on the hair follicles beneath the surface for optimal
efficacy.
If you have light hair, it is recommended that you wax or
epilate immediately before treating with the mē in order
to get the best results. Make sure to clean your skin of any
wax or hair residue before starting treatment. Do not treat
if you feel your skin is irritated from waxing or epilation.
EN 8