Using Your Mē For The First Time - Me chic User Manual

Using your mē for the first time
Setting up your mē
1. Lift the device from the stand.
1
2. Clean the treatment window with
3. Connect the power cord into the
2
4. Connect the power cord to an
3
4
7 EN
Prior to first time use, remove the
protective seal sticker from the
device.
a non-alcohol based wet wipe or
soft tissue. This is done in order to
remove any debris or dust from
the treatment window.
power supply port found on the
control panel of the mē.
AC outlet.
5. Press the power button to turn
5
6. Press the elōs button once to
6
7. To increase the setting to
7
Note: When moving from HIGH to LOW, the device will
reset. The energy indicator lights will cycle momentarily
before the LOW energy indicator light appears a steady
blue. Proceed treating on LOW only after the the LOW
indicator light is steady.
the device on. All 3 energy level
indicators will light up blue and
start blinking.
select the LOW energy level.
When the energy indicator
lights up steady blue, the mē is
ready for use.
MEDIUM or HIGH, press the
elōs button until the indicator
displays the desired level.