Web And Data; Wi-Fi; Turn Wi-Fi On And Connect To A Wireless Network; Check The Wireless Network Status - Kyocera DURAXE User Manual

Web and Data

Your phone's data capabilities let you wirelessly access the Internet or your corporate
network through a variety of connections including Wi-Fi, 4G LTE,
GPRS, and Virtual Private Networks (VPN). The following topics address your phone's data
connections and the built-in Web browser.

Wi-Fi

Turn Wi-Fi On and Connect to a Wireless Network

1. From the Home screen, press Menu (center softkey) > Settings > Wireless &
networks > Wi-Fi.
2. Press Turn on (right softkey) to turn Wi-Fi on. The network names of detected Wi-
Fi networks are displayed.
3. Highlight a Wi-Fi network you want to connect and press
network. If you selected an open network, you will be automatically connected to
the network. If you selected a network that is secured with a password, enter the
password and then press Save (right softkey).
When your phone is connected to a wireless network, the Wi-Fi icon (
status bar and tells you the approximate signal strength.
If Network notification in Advanced Wi-Fi settings is enabled, the open network icon
( ) appears in the status bar whenever the phone detects an available open wireless
network within range.

Check the Wireless Network Status

1. From the Home screen, press Menu (center softkey) > Settings > Wireless &
networks > Wi-Fi.
2. Highlight wireless network that the phone is currently connected to and press
Show details. You will see a message box showing the Wi-Fi network name, status,
signal strength, speed, and other details.
Note: If you want to remove the wireless network settings, select Forget network. You
need to enter the settings again if you want to connect to this wireless network.
Web and Data 64
H+(UMTS), HSPA, EDGE,
> Connect to
) appears in the
>