Kenwood KDC-BT765HD Instruction Manual page 18

SiriusXM® Radio
TuneScan™
You can get a short preview of the songs that you have missed
on each of your SmartFavorite music channels or currently
tuned music channel.
Press and hold to start scanning the first 6 seconds
of the recorded music contents.
• To listen to the current song, press the volume knob to stop
scanning. The unit continues playing the current song.
• To select the previous/next song, press S / T.
• To cancel scanning, press and hold the volume knob.
Playback returns to the channel before you entered
TuneScan.
SiriusXM settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SIRIUS XM], then press the
knob.
3
Turn the volume knob to select an item (see the following
table), then press the knob.
4 3
Repeat step until the desired item is selected/activated
or follow the instructions stated on the selected item.
5
Press and hold to exit.
To return to the previous setting item, press
14
CHANNEL LOCK
CODE SET
LOCK SETTING
CHANNEL EDIT *
CHANNEL CLEAR *
TUNE START * 2
.
SIGNAL LEVEL
BUFFER USAGE
SXM RESET
* 1
Displayed only when [USER DEFINED] is selected.
* 2
Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later that supports SmartFavorites.
To unlock settings:
1 Turn the volume knob to select a number.
2 Press S / T to move to the entry position.
3 Repeat steps 1 and 2 to enter the current pass code.
(Initial pass code is 0000.)
4 Press the volume knob to confirm.
1 Turn the volume knob to select a number.
2 Press S / T to move to the entry position.
3 Repeat steps 1 and 2 to enter a new 4-digit pass code.
4 Press the volume knob to confirm.
5 Repeat steps 1 to 4 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings for next time.
MATURE CH: Selects the SiriusXM-defined lock setting. ; USER DEFINED: Selects
the individual channels the user wants to lock. ; OFF: Cancels.
1 1 Turn the volume knob to select a category, then press the knob.
2 Turn the volume knob to select a channel you want to lock, then press the
knob.
"L" appears in front of the channel number.
3 Press and hold
to exit.
1
YES: Clears all the locked channels. ; NO: Cancels.
ON: All qualified music channels in the SmartFavorite will start playback from the
beginning of the song. ; OFF: Cancels.
NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the strength of the current received
signal.
0% — 100% (0): Shows the memory usage for Replay buffer.
YES: Resets stored channel and lock setting to default. ; NO: Cancels.
Default: XX