MSI MS-6555 Manual page 53

CPU THRM-Throttling
The item allows you to specify the CPU speed (at percentage) to which it will
slow down when the CPU reaches the predetermined overheat temperature.
Settings range from 12.5% to 87.5% at 12.5% increment.
Resume by RTC Alarm
The field is used to enable or disable the feature of booting up the system on
a scheduled time/date.
Date (of Month) Alarm
The field specifies the date for Resume by RTC Alarm. Settings: 0~31.
Time (hh:mm:ss) Alarm
The field specifies the time for Resume by RTC Alarm. Format is <hour>
<minute><second>.
POWER ON Function
This setting controls which part on the PS/2 mouse or keyboard can power on
the system. Settings: Password, Hot KEY, Mouse Left, Mouse Right, Any KEY,
BUTTON ONLY and Keyboard 98. Please note that this function will only work
under S3 mode.
KB Power ON Password
If POWER ON Function is set to Password, then you can set a password in the
field for the PS/2 keyboard to power on the system. Please note that this
function will only work under S3 mode.
Hot Key Power ON
If POWER ON Function is set to Hot KEY, you can assign a hot key combina-
tion in the field for the PS/2 keyboard to power on the system. Settings: Ctrl-
F1 through Ctrl-F12. Please note that this function will only work under S3
mode.
Power Again
This setting specifies whether your system will reboot after a power failure or
interrupts occurs. Available settings are:
Power Off Leaves the computer in the power off state.
Power On Reboots the computer.
Last State Restores the system to the status before power failure or
interrupt occurs.
AWARD
3-21
BIOS Setup
®