MSI MS-6555 Manual page 27

Note: To have the Line-out connector on the back panel work
properly, you need to place jumpers on pin# 5~8 (F_AUDIO) or on
pin#5~6 and 9~10 (JAUDIO1) of the front panel audio connector.
Otherwise, this Line-out connector will not function and nothing can
be heard through speakers or headphones attached to the Line-out
connector on the back panel. But front panel audio connector is
enabled at this point and allows you to connect speakers or head-
phones through the front panel.
2 6 8
F_AUDIO
1 5 7
(OPEN pin# 5~8)
9
JAUDIO1
10
(OPEN pin# 5~6 and 9~10)
- Disable Line-out connector on the
back panel
- Enable Front Panel Audio
Connector
2
1
(SHORT pin# 5~8)
5 1 9
6 2 10
(SHORT pin# 5~6 and 9~10)
- Enable Line-out connector on the
back panel
- Disable Front Panel Audio
Connector
2-21
Hardware Setup
6 8
5 7
5 1
6 2