Aux In Jack & Encoding - auna TT1200 Manual

1. PRESS FUNCTION BUTTON TO SELECT "TAPE" ON DISPLAY.
2. AFTER INSERTING THE CASSETTE TAPE, THE SYSTEM WILL START PLAYING AUTOMATICALLY.
3. ADJUST THE VOLUME TO THE DESIRED LEVEL.
4. PRESS THE TAPE FAST FORWARD / EJECT BUTTON AT CASSETTE PLAYER HALF WAY DURING
PLAYING, THE TAPE WILL BE ADVANCED FORWARD RAPIDLY.
5. SLIGHTLY PRESS THE TAPE FAST FORWARD / EJECT BUTTON AGAIN TO RESUME NORMAL PLAYING,
THE BUTTON WILL RESUME TO THE OUTERMOST POSITION.
6. PRESS THE TAPE FAST FORWARD / EJECT BUTTON COMPLETELY, THEN THE PLAYING WILL BE
STOPPED AND THE CASSETTE TAPE WILL BE EJECTED.
REMARK:
MAKE SURE THE DIRECTION IS CORRECT WHEN INSERTING THE TAPE. TO AVOID DAMAGING THE
TAPE, IT IS HIGHLY RECOMMENDED TO TAKE OUT THE TAPE AFTER LISTENING.
CASSETTE TAPE ENCODING
1. PRESS FUNCTION BUTTON TO SELECT "TAPE" ON DISPLAY AND THEN INSERT MEMORY DEVICE
(USB DRIVE, SD OR MMC CARD)
2. PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDSS TO READ MEMORY DEVICE. THEN USB
OR SD ICON WILL BE FLASHING.
3. PRESS SKIP DOWN
SD) FOR ENCODING. THEN PRESS THE REC BUTTON AGAIN TO CONFIRM. AND THE SYSTEM IS
STARTING THE ENCODING MODE AFTER FEW SECONDSS.
4. IF ONLY USB DRIVE OR SD/MMC CARD IS INSERTED, STEP 3 CAN BE SKIPPED.
5. THE USB OR SD ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
6. TO FINISH ENCODING, PRESS STOP
TO "TAPE" MODE.
REMARK:
• THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE TAPE.
• THE RECORDING FORMAT IS PRESET AT – MP3 BIT RATE : 128 KBPS
PRESS FUNCTION BUTTON TO SELECT "AUX" ON DISPLAY, THEN CONNECT THE EXTERNAL AUDIO
DEVICE (SUCH AS CD PLAYER) THROUGH THE AUX IN JACK. AUDIO SIGNAL FROM THE EXTERNAL
AUDIO DEVICE CAN BE PLAYED THROUGH THE SYSTEM.
AUX IN ENCODING
1. PRESS FUNCTION BUTTON TO SELECT "AUX" ON DISPLAY, THEN INSERT MEMORY DEVICE (USB
DRIVE, SD OR MMC CARD)
2. PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDSS TO READ MEMORY DEVICE. THEN USB OR
CASSETTE TAPE & ENCODING
BUTTON OR SKIP UP
AUX IN JACK & ENCODING
BUTTON TO SELECT DESIRED MODE (USB OR
BUTTON AND DISPLAY WILL SHOW "END" AND RETURN
22