auna TT1200 Manual page 20

• HOLD THE COUNTER WEIGHT WITH ONE HAND, TURN SCALE RING TO "5" AGAINST THE INDEX
LINE ON THE SHAFT WITH ANOTHER HAND, BE SURE NOT TO TURN TOGETHER WITH THE COUNTER-
WEIGHT
• THE NUMBER ON THE SCALE RING CORRESPOND TO 1G OF TRACKING FORCE. FOR OUR DEFAULT
RUBY NEEDLE, TURN THE SCALE RING TO 4.5-5G.
• TURNTABLE FOOT CAN BE TURNED CLOCK-WISE OR COUNTER CLOCK-WISE TO MAKE THE TURN-
TABLE BALANCED.
LEVEL BALANCE ADJUSTMENT
• SET THE ANTI-SKATE KNOB TO "0".
• HOLD THE HEADSHELL'S FINGER-LIFT WITH ONE HAND AND ACHIEVE "LEVEL
BALANCE" BY TURNING THE COUNTERWEIGHT EITHER CLOCKWISE OR
COUNTER CLOCK WISE. "LEVEL BALANCE" MEANS THE TONEARM IS PARALLEL
TO THE RECORD ON THE PLATTER, AND THAT THE TONEARM PIPE SHOULD
NOT TILT TOWARDS THE COUNTERWEIGHT SIDE OF THE HEADSHELL SIDE
TONEARM PROPERLY BALANCED:
COUNTERWEIGHT END IS TOO HEAVY, TURN THE COUNTER-
WEIGHT COUNTER-CLOCK WISE TO ADJUST:
HEADSHELL END IS TOO HEAVY, TURN THE COUNTER-
WEIGHT CLOCK-WISE TO ADJUST:
20