Oki IP-7900-20 Basic Operation Manual page 58

2
3
Adjust the paper tube flange position.
4
By loosening the handle, adjust the paper tube position or the paper tube flange position so that the distance
between the media edge and the two paper tube flanges would be 3 to 5mm.
After the adjustment, fix the paper tube by rotating the handle.
Media
NO
Paper tube
YES
58
IP-7900/IP-7700 Basic Operation Guide
Flange
NO
Handle
Paper tube ange
Media
Paper tube
Paper tube ange
3∼5mm
(Distance between the media edge and
each paper tube ange)
Mount the scroller to the take-up roll.
which will make the operation easier from this step.
By pressing the key, feed the media until
the front media edge is wound on the paper
tube.
F E E D I N G M E D I A
Rubber spacer C
Media
Paper tube
Paper tube ange
Clear this gap.
Flange
Handle