Husqvarna HUV4210-G Owner's Manual page 34

Periodic Service Schedules
PERIODIC SERVICE SCHEDULE – ELECTRIC VEHICLES
REGULAR INTERVAL
Daily service by owner
Weekly service by owner
Monthly service by owner or trained
technician
Semiannual service by trained technician
only (or every 50 hours of operation,
whichever comes first)
Annual service by trained technician only
(or every 100 hours of operation, whichever
comes first)
Page 32 2009 HUV4210 Owner's Manual
SERVICE
Pre-Operation and Daily Safety Checklist
Performance Inspection
Batteries
Batteries
Batteries
Tires
General vehicle
Brake system
Electrical wiring and connections
Forward/Reverse switch
Front wheel alignment and camber
Motor controller output regulator (MCOR)
Batteries
See Pre-Operation and Daily Safety
Checklist on page 20.
See Performance Inspection on page 21.
Charge batteries (after each daily use only).
Check electrolyte level. Add water if
necessary. See page 36.
Wash battery tops and clean terminals with
baking soda/water solution.
Check air pressure and adjust if necessary.
See Vehicle Specifications on page 48.
Wash battery compartment and underside of
vehicle.
Check brake shoes; replace if necessary.
See Wheel Brake Assemblies Section in
the appropriate maintenance and service
manual.
Lubricate brake slides per Lubrication
Schedule. See Wheel Brake Assemblies
Section in the appropriate maintenance
and service manual.
Check brake cables for damage; replace if
necessary.
Check for tightness and damage.
Check condition of contacts and wire
connections. Make sure connections are tight.
Check and adjust as required. See Steering
and Front Suspension Section in the
appropriate maintenance and service
manual.
Check for loose hardware, cracks and other
damage.
If batteries are not performing as expected,
see Batteries Section in the appropriate
maintenance and service manual.