Preparation For Use; Power Supply - Akai ADI-18K User Manual

UNPACKING AND SET UP
The Tower
Carefully remove all the components from the carton and remove all packing materials from
the components. Make sure noting is accidentally discarded with the packing materials.
Save the carton and the packing materials, if possible, in the unlikely event that the unit
ever needs to be returned for service. Using the original carton and packing material is the
only proper way to protect the unit from shipping damage.
Unwind the AC power cord on the back of the main unit and extend it to its full length.
Using AC Power
1. Check if the power voltage, as shown on the type plate located on the back of the set,
corresponds to your local AC power supply. If it does not, consult your dealer or service centre.
2. Connect the power cord to the wall outlet. The power supply is now connected and ready for
use.
3. To switch off completely, turn off the main power on/off button and unplug the power cord
from the wall outlet.
Unplug the power cord from the wall outlet to protect your set during heavy thunderstorms.
If electric cable is damaged, it must be replaced by manufacturer, or by the qualification
persons, in order to avoid a danger.
The mains plug is used as disconnect device, the disconnect device shall remain readily
operable.

PREPARATION FOR USE

Remote AV cable
Control

POWER SUPPLY

5 x Docking brackets
wall outlet
power cord
21
User manual