Table of Contents
Advertisement
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage within the product enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
1. READ INSTRUCTIONS --- All the safety and operating instructions should be read before the product is
operated.
2. RETAIN INSTRUCTIONS --- The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS --- All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS --- All operating and use instructions should be followed.
5. CLEANING --- Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6. ATTACHMENTS --- Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
7. WATER AND MOISTURE --- Do not use this product near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
8. ACCESSORIES --- Do not place this product on an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a child or adult and serious damage to the product.
Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with
the product. Any mounting of the product should follow the manufacturer instructions, and should
use a mounting accessory recommended by the manufacturer. A Product and Cart Combination
Should Be Moved with Care - Quick stops, excessive force and uneven surfaces may cause the
product and cart combination to overturn.
9. VENTILATION --- Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not
be placed in a built-in installation, such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer* instructions have been adhered to.
10. POWER SOURCES --- This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local
power company. For products intended to operate from battery power, or other sources, refer to the operating
instructions.
11. GROUNDING OR POLARIZATION --- This product may be equipped with a polarized alternating-current line
plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a
safety feature: If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still
fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
12. POWER-CORD PROTECTION --- Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where exit from the product.
13. NON-USE PERIODS --- The power cord of the product should be unplugged from the outlet when left unused
for long
periods of time.
14. OUTDOOR ANTENNA GROUNDING --- If an outside antenna or cable system is connected to the product, be
sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up
static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna- discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
DO NOT OPEN
19
Advertisement
Table of Contents
