Duration Counter; Automatic Memory; To Store A Number In Memory; To Dial A Phone Number In Memory - Cortelco Colleague 2220 Owner's Instruction Manual

Hide thumbs Also See for Colleague 2220:

Table of Contents

SPEAKERPHONE and then hang up the handset.

DURATION COUNTER

A built-in counter will start counting for your reference 6 seconds after you lift the

handset or 6 seconds after you dial a telephone number.

To Store A Number In Memory: (Telephone must be on-hook)

Press and hold the SAVE button for more than 2 seconds. [SAVE TO?] appears

display window.

Press the key (located on right-hand side of base) you want to store the number.

Then [ENTER NUMBER] appears on the display window.

Enter the number you want to store. After you complete the number, press the

SAVE button. Then [ENTER NAME] appears on the display window. Use the

keypad to input the name associated with the number. (See page 13 for instructions.)

Press the SAVE button again.

Lift the handset or press speakerphone and wait for a dial tone.

Press any memory location.

To dial an auto memory button (located on right-band side of base) - Press the

•

desired auto memory button (1, 2, 3.... or 10).

The number will be displayed and dialed automatically.

A built-in amplifier feature allows you to increase the listening volume when speaking

with your party. When needed, press the VOLUME button to achieve different levels.

The Volume will remain at the last setting after hanging up.

If the number you dialed is busy, or you want to call the last number dialed again,

press and release the hookswitch for a new dial tone.

Press REDIAL. The number will appear on the display window.

The last number called will automatically be redialed.

Table of Contents