Using Your Phone; Receiving A Phone Call; Placing A Phone Call; Speakerphone Button - Cortelco Colleague 2220 Owner's Instruction Manual

U
SING

RECEIVING A PHONE CALL

1. Be sure the RINGER switch is set to the HI or LOW position.
2. When the phone rings and the callers information shows on the display window
(refer to Using the Caller ID Function), lift the handset or press the SPEAKERPHONE
button and begin your conversation.
3. Set the Ringer switch to the OFF position when you do not want to be
interrupted by the phone ringing.

PLACING A PHONE CALL

1. Lift the handset or press the SPEAKERPHONE button and wait for a dial tone.
2. Dial the telephone number you wish to call. The number will appear on the display
window.

SPEAKERPHONE BUTTON

1. Receiving Incoming Calls
a. When the phone rings and the caller's information shows on the display
window (refer to Using the Caller ID Function), press and release the
Speakerphone button and talk normally into the built-in microphone from a
distance of 5-6 inches.
b. You can adjust the volume of the caller's voice by pressing the VOLUME
button to obtain the desired volume level.
c. After the conversation has finished, press the SPEAKERPHONE button to
hang up.
2. To Make A Call
a. Press and release the SPEAKERPHONE button.
b. When you hear a dial tone, dial the number or press the auto memory
button just as you would on any other push-button telephone. The number
appears on the display window.
c. After the conversation has finished, press SPEAKERPHONE to hang up.
Note:
1. If you wish to switch from handsfree to handset, simply lift the handset.
2. If you wish to switch from handset to handsfree, press and release
Y T
OUR ELEPHONE
8